INDOOR CAT ENCLOSURE
INDOOR CAT ENCLOSURES
Purrfect for Breeders
Built in an Amish shop in Pennsylvania, with know- how only the Amish cractsmen know how to build. Beautiful wood, artisan craftsmanship, elegant finishes ........... everything you can ask for in a beautiful, furniture quality pet kennel for inside your home. Whether it is a temporary enclosure for a few days or a permanent fixture for a breeder's home. you will always be proud to let everyone see it.
Extra high and full size indoor pet enclosure / room divider, designed as an attractive open containment alternative to shutting pets in a room or a crate. The very tall 77" high walls can keep most jumping, climbing cats and dogs in or out of an area and to keep 2 or more pets apart.
If you are a breeder of cats, you will want the slats no more than 1 inch apart, since a kitten or cat can get through anything their head will fit through. We call it kitten spacing.
Any configuration you can imagine, can be put together using our front Panel, with door and optional 30" add on panels.
The main front door section is available 5' (a door & one left or right 30" wide side panel) or 7' 4" wide (a door & two 30" wide panels), with a 28" wide 2 way door. Additional 30" panels can be added to the front, side or for a third side.
Available in solid oak or maple hardwood with a choice of finish options. The panels and door have 3/4" square slats with 2" wide openings, and are framed with 2" to 2 1/2" wide tops and sides. The panels are tied together with a header and footer board on top and bottom.
- All photos here show an 7' 4" wide front panel with a 30" wide right side panel.
Must be attached to walls, not designed to be free standing. It is very important that these enclosures are attached to a wall with brackets. they cannot be free standing as they may tip.
Wall Mounting Brackets, 2 where each wall ends, are provided to attach the panels to walls. The brackets allow for 3/4" to 2 3/4" panel to wall adjustments. These should work with many setups and rooms, however special mounting may be needed depending on the type of wall and other obstacles. The end user may have to do some modifications and acquire other fasteners and mounting hardware.
Each panel section is split in middle allowing for standard ground shipping. A screw driver (powered recommended) is required for reassembly.
Front Door Panels:
60" (5') wide x 77" high
88" (7' 4") wide x 77" high
Door Opening: 28" wide x 75 1/2" high
Add On Panels: 30" wide x 77" high
SEE THE BEAUTIFUL WOOD FINISH OPTIONS HERE
Ships in 3 to 4 Weeks
Available to Canada, Request a shipping quote HERE
Submit a Review...
"THANKS" DISCOUNT CODES - STOREWIDE
Click Below to Get Started: